Connecting Host Computers
You are now ready to connect the library to one or more host computers. Up to five
host computers can be connected on separate SCSI buses. Sample configurations are
shown in FIGURE 2-15 through FIGURE 2-17.
Note – Sun Microsystems™ ships sufficient cables and terminators with this library
for a two-drive, one-bus configuration or a four-drive, two-bus configuration.
Additional cables and terminators must be purchased separately.
Host connector
Two-Drive, Single-Bus SCSI Configuration
FIGURE 2-15
15-inch (38-cm)
SCSI cable
Chapter 2
StorEdge L1000
back panel
Terminator
7-inch (18-cm)
SCSI cables
To host
computer
TH000012a
Installing the Library
31