Carrier 42QFD048D8S Service Manual page 68

Procedure
3) Remove the hex nuts and washers securing
the compressor, located on the bottom
plate (see CJ_ODU_COMP_003).
4) Heat up the brazed parts and then remove
the the discharge pipe and the suction
pipe (see CJ_ODU_COMP_004).
5) Lift the compressor from the base pan
assembly with pliers.
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Discharge Pipe
Outdoor Unit Disassembly 13

CJ_ODU_COMP_003
CJ_ODU_COMP_004

Suction Pipe