2.8
Evaporator
Procedure
1) Remove 7 screws affixing the top
cover.(see CJ_GD_022)
2) Remove the top cover.
3) Remove 3 screws on each side of the
cover assembly.(see CJ_GD_023)
4) Take the cover off.
5) Remove 2 screws affixing the inlet/
outlet pipes of the evaporator.(see
CJ_GD_024)
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Indoor Unit Disassembly 14
CJ_GD_022
CJ_GD_023
CJ_GD_024