Carrier 42QFD048D8S Service Manual page 44

2.2 Air Inlet Grille Subassembly
Procedure
1) Open the screw cap on each side
of air inlet grille subassembly.(see
CJ_GD_002)
2) Remove 2 screws. (see CJ_GD_002)
3) Then pull the air inlet grille subassembly
and lift up to remove it (see CJ_
GD_003)
(Note: To prevent injury, pay attention to
the hooks located at the bottom.)
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
 Indoor Unit Disassembly 4
CJ_GD_002
CJ_GD_003
