Installation Instructions; Installing Your Gas Cooktop - Dacor Modernist DTG30M954F Series Installation Instructions Manual

Installation instructions

Installing your gas cooktop

IMPORTANT:
Carefully read these instructions and the Important Safety Instructions section at the front
of this manual BEFORE installing/operating the cooktop. Improper installation, adjustment,
service, or maintenance can lead to personal injury and property damage.
NOTE
To ensure proper installation, you should hire a qualified professional.
Unpacking the cooktop
1. Remove all packaging material. (Failure to do so could damage the appliance.)
2. Inventory all loose parts against supplied components listed on Page 16.
3. Check for shipping damage, and report any damage and missing parts to your local
retailer.
Installing the cooktop
1. If a downdraft vent will accompany the cooktop, first install the downdraft as specified
in its installation instructions.
2. Lower the cooktop into the cutout and center it.
3. Secure the cooktop to the countertop using the two hold-down brackets as shown
below.
Attaching the hold-down brackets
Case 1.
M4 L10 screw
M4 L16 screw
26 English
Install_NA9300K_MOD_DTG30M954FS_DG68-00926A-01_EN+MES+CFR.indb 26
Countertop
Chassis
Side wall of
undercounter
cabinet
Hold down
bracket
Case 2.
Countertop
Chassis
Hold down
bracket
M4 L10 screw
24 3 / UNC L145
16
nut toggle
6/19/2018 6:49:17 PM