Table of Contents
Advertisement
Unpack the Rangetop
WARNING
•
If the gas and electric service provided does not
meet the product specifications, do not proceed with
the installation. Call the dealer, the gas supplier or a
licensed electrician.
•
The rangetop is heavy. A minimum of two people are
required to safely install it.
Unpack the parts box and verify that all required compo-
nents have been provided. If any item is missing or dam-
aged, please contact your dealer immediately. Do not install
a damaged or incomplete appliance. The customer must
report cosmetic issues within 30 days of installation.
1
•
3 Grates
•
2 large stack burner caps (PN 100699)
•
2 large stack burner rings (PN 100699)
•
2 small stack burner caps (PN 700493)
•
2 small stack burner rings (PN 700493)
•
2 crown burner caps (PN 100703)
•
2 crown burner rings (PN 100703)
•
2 crown burner heads (PN 100703)
•
4 standard knobs (PN 105374-01)
•
2 standard knobs (PN 105374-02)
•
Dacor Stainless Steel Cleaner (PN A302)
•
WOK ring (PN 700410)
•
Griddle (PN 700409)
•
2 hold down bolts (PN 83383)
•
2 washers (for hold down bolts, PN 83203)
•
Regulator (NG PN 62834, LP PN 72980)
•
Product literature
1
Model EG486 comes with (3) 14 inch grates (PN
700038). Model EG366 comes with (2) 10-inch grates (PN
700037) and (1) 14-inch grate (PN 700038).
2
PN 100699 includes 1 burner ring and 1 burner cap
3
PN 700493 includes 1 burner ring and 1 burner cap
4
PN 100703 includes 1 burner base, 1 burner ring and 1
burner cap
8
Installation Instructions
2
2
3
3
*
4
4
4
Rangetop Installation
WARNING
•
To prevent damage to the gas pressure regulator,
install it only after the rangetop is mounted in its per-
manent position.
•
Do not over-tighten the hold down bolts. Over tight-
ening the hold down bolts may result in improper
operation of the dual gas burners.
IMPORTANT
Do not use a hardening compound or caulk to
permanently seal the rangetop into place. The rangetop
must be readily removable if service is required. Removal
of sealant to service the unit will be performed at the
customer's expense.
1. Lower the rangetop into the cutout while feeding the
electrical cord into the utility cutout. Center the ran-
getop in the cutout.
2. Secure the rangetop to the countertop using the two
(2) provided hold-down bolts and washers provided. Do
not overtighten the bolts.
Advertisement
Table of Contents
