Installation Instructions; Preparing For Installation - Dacor Heritage Induction Pro Range Installation Instructions Manual

Installation Instructions

Preparing for Installation

• If the gas or electric service provided does not meet the product specifications, discontinue installation,
and call the dealer, gas supplier, or a licensed electrician.
• Before moving the range into place, install the anti-tip bracket (see below for instructions).
Unpacking the Range
Unpack the parts box, and verify that all specified components are present (see Pg. 9 or 10). If any item is miss-
ing or damaged, contact your dealer immediately. Do not install a damaged or incomplete range.
Installing the Anti-tip Bracket and Foot
There are two ways to mount the anti-tip bracket: Floor mounting (preferred), and wall mounting (Pg. 19).
Wall-mount the bracket if floor mounting is unsuitable; however, if the range's front panel is over 26 1/2" (67.3
cm) from the back wall or if the floor is too thick, floor mounting must be used.
Floor-Mounting the Anti-tip Bracket
To perform as designed, the bracket must attach to the concrete slab or wood sub-floor below any upper
flooring (including cement board). Do not attach the bracket directly to floor coverings such as ceramic/
asphalt tile or linoleum.
• Four plastic anchors are provided with three sizes (4 each)
of #8 and #12 Phillips head screws for floor-mounting the
anti-tip bracket. Use the anchors and four of the screws to
attach the bracket for concrete sub-floor applications only.
• Determine the location of the range centerline and front
panel for the range's final position (see Product Dimen-
sions, Pg. 13), and the actual cabinet/cutout dimensions
used for the installation.
15