K-array KR102 User Manual page 32

KR PORTABLE SYSTEM
DELAY
CONFIGURATION
Warning: If you are using speakers with selectable impedance, pay
attention to set the value indicated in the Configuration Page!
The Delay Page allows users to independently set the
delays for the two output channels driving the subwoofer
and the speakers connected to the Speaker Out (up to
3.5 m) and for Channel 1 and Channel 2 input channels
(up to 114 m).
Pressing on a delay value, users can set the delay in
milliseconds or meters. Press the OK button to return to
the Delay Page.
When you buy a KR system, the correct preset is already
loaded and the system is ready to play.
If necessary, the system can be dismounted and the
subwoofer can be used to drive different K-array passive
speakers. In this case, go to the Configuration Page
and press the SETUP button. Insert the model and the
number of speakers connected to the Speaker Out.
Press the NEXT button on the top right corner. Press the
APPLY button and the DSP will automatically adjust the
output gain and the crossover to match the requirement
for the speakers connected.
Ver. 1.0
32