Download Print this page

Install The Modules - Kaiterra Sensedge Mini Installation Manual

In-wall mount (drywall)

Hide thumbs Also See for Sensedge Mini:

Install the modules

To install the sensor module, simply align it with

the bay and press it in, ensuring the Kaiterra

logo on the plastic tab is facing outwards.

When inserted correctly, the module will click

into place, and an LED light above the bay will

brieﬂy ﬂash red if the device is powered on.

Sensor modules may be inserted in either

sensor bay, and in any order. After successfully

installing the modules, put the front cover on.

Table of Contents