Download Print this page

Kaiterra Sensedge Mini Installation Manual page 20

In-wall mount (drywall)

Hide thumbs Also See for Sensedge Mini:

Conﬁgure Modbus Settings - Prepare for Conﬁguration

Download the Kaiterra Conﬁguration Tool and install it on your computer or smartphone.

After the device has been turned on, it will automatically enter the conﬁguration mode for 15 minutes. The

STATUS light will ﬂash in yellow. If your device isn't in conﬁguration mode, please turn off the device and

turn it back on again.

Conﬁgure Modbus Settings - Connect to network

Open network settings on your computer or smartphone and look for the Wi-Fi network that starts with

"Kaiterra". Connect to that network.

On the Conﬁguration Tool, you can enter a name for the device (e.g. the location of the device or the serial

number) and a project tag. This will provide easy identiﬁcation and ﬁltering in the conﬁguration history page

later on to help you quickly connect the device to the Kaiterra dashboard.

Enter the Modbus settings details to the applicable ﬁelds on the Conﬁguration Tool, including your Modbus

address (enter a number between 1 and 247), AQI standards, and pollutants to include in your AQI calculation.

Please consult the facility manager or other responsible personnel if the Modbus address is not clear.

Click conﬁgure device and disconnect from the "Kaiterra" network.

Table of Contents