Kaiterra Sensedge Mini Installation Manual page 17

Manual Mode - Prepare for Configuration
If you choose to set up manual mode, please download the Kaiterra Configuration Tool and install it on
your computer or smartphone.
After the device has been turned on, it will automatically enter the configuration mode for 15 minutes. The
STATUS light will flash in yellow. If your device isn't in configuration mode, please turn off the device and
turn it back on again.
Manual Mode - Connect to network
Open network settings on your computer or smartphone and look for the Wi-Fi network that starts with
"Kaiterra". Connect to that network.
On the Configuration Tool, you can enter a name for the device (e.g. the location of the device or the
serial number) and a project tag. This will provide easy identification and filtering in the configuration
history page later on to help you quickly connect the device to the Kaiterra dashboard.