Table of Contents
Advertisement
3
BIOS Setup
3.1.7 Frequency/Voltage Control
The settings on the screen are for reference only. Your version may not be identical
to this one.
3.1.7.1 Auto Detect PCI/DIMM Clk
When enabled, the system will automatically send clock signals to
existing PCI or DIMM devices.
3.1.7.2 Spread Spectrum
Leave this field in its default setting. Do not alter this setting un-
less advised by an engineer or technician.
3.1.7.3 CPU Host/AGP/PCI Clock
This field provides several options for selecting the external sys-
tem bus clock of the processor. The AGP clock and PCI clock will
at the same time appear next to the external bus clock selected.
For example, if you selected "100/66/33MHz", "100" is the exter-
nal bus clock, "66" is the AGP clock and "33" is the PCI clock. The
default setting is "Default". Under this setting, the system will run
according to the processor's clock frequency.
80
Important:
Overclocking may result to the processor's or system's instability
and are not guaranteed to provide better system performance.
Advertisement
Table of Contents
