DFI KM400A-MLV User Manual page 57

3.1.2.11 Typematic Rate (Chars/Sec)
This field allows you to select the rate at which the keys are
accelerated.
3.1.2.12 Typematic Delay (Msec)
This field allows you to select the delay between when the key
was first depressed and when the acceleration begins.
3.1.2.13 Security Option
This field determines when the system will prompt for the pass-
word - everytime the system boots or only when you enter the
BIOS setup. Set the password in the Set Supervisor/User Pass-
word submenu.
System The system will not boot and access to Setup will be
denied unless the correct password is entered at the
prompt.
Setup The system will boot, but access to Setup will be de-
nied unless the correct password is entered at the
prompt.
3.1.2.14 MPS Version Control for OS
This field is used to select the MPS version that the system
board is using.
3.1.2.15 OS Select for DRAM > 64MB
Select the "OS2" option only if the system that is running an
OS/2 operating system has greater than 64MB RAM.
BIOS Setup
57
3