Table of Contents
Advertisement
3
BIOS Setup
3.1.3.2 AGP & P2P Bridge Control
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be identical
to this one.
AGP Aperture Size
This field is relevant to the memory-mapped graphics data of the
AGP card installed in your system. Leave this in its default setting.
AGP Mode
This field allows you to select the AGP mode (data transfer rate) that
your
with high bandwidth speeds.
1X
2X
4X
AGP Driving Control
Set this field to Manual only if there are compatibility problems
with some AGP cards. When set to Manual, you must select a value
in the "AGP Driving Value" field.
AGP Driving Value
This field is used to select a value for the AGP Driving control. We
recommend that you leave this field in its default setting.
62
AGP card supports to enable enhanced graphics performance
provides data transfer rate of up to 264MB/sec.
provides data transfer rate of up to 528MB/sec.
provides data transfer rate of up to 1066MB/sec.
Advertisement
Table of Contents
