IDE HDD Block Mode
Enabled The IDE HDD uses the block mode. The system
BIOS will check the hard disk drive for the maximum
block size the system can transfer. The block size will
depend on the type of hard disk drive.
Disabled The IDE HDD uses the standard mode.
3.1.4.2 VIA OnChip PCI Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be identical
to this one.
Onboard AC97 Audio
Auto
Disabled
Onboard LAN (KM400A-MLV/KM400-MLV only)
This field is used to enable or disable the onboard LAN.
OnChip USB Controller
This field is used to enable or disable the onboard USB.
Select this option when using the onboard audio
codec.
Select this option when using a PCI sound card.
BIOS Setup
67
3