DFI KM400A-MLV User Manual page 55

3.1.2.2 CPU Internal Cache and External Cache
These fields speed up the memory access. The default is Enabled,
which provides better performance by enabling cache.
3.1.2.3 CPU L2 Cache ECC Checking
The processors supported by the system board come with built-
in Level 2 cache. By default, ECC is enabled to check the Level 2
cache. If you are not using this function, set this field to Disabled.
3.1.2.4 Quick Power On Self Test
This field speeds up Power On Self Test (POST) whenever the
system is powered on. The BIOS will shorten or skip some check
items during POST. To attain the shortest POST time, select "Ena-
bled".
3.1.2.5 SATA or SCSI Card Boot
If there are drives connected to both the SATA connector and
PCI SCSI add-in card, you must select the drive you want to
boot.
VIA 8237 SATA
PCI SCSI Card
3.1.2.6 First Boot Device, Second Boot Device, Third Boot Device
and Boot Other Device
Select the drive to boot first, second and third in the "First Boot
Device" "Second Boot Device" and "Third Boot Device" fields
respectively. The BIOS will boot the operating system according
to the sequence of the drive selected. Set "Boot Other Device"
to Enabled if you wish to boot from another device.
The drive is connected to the SATA connec-
tor that is on the system board.
The drive is connected to the PCI SCSI add-
in card that is installed in a PCI slot.
BIOS Setup
55
3