Preset Setting - Speco N16NRD User Manual

PTZ NVR User Manual
In the "Add Cruise" window, select the cruise line name. After that, click "Play" to play the cruise lines in sequence.

Trace Settings
On the right panel, click to go to the trace setting tab. Click "Add" to add the trace name. Then click "OK" to save this name. Please refer to
the following picture.
After that, click "Start Record" to record the trace. Then click "Stop Record" to finish recording. Click to play the recorded trace. Click
to delete the trace.

6.2 Preset Setting

Click StartSettingsCameraPTZPreset to go to the interface as shown below.
27