Table of Contents
Advertisement
Playback & Backup
Introduction of area ④:
Click
to set the date; click
record type as required for record playback; first you should click
camera, then check the record type (
record;
: POS record, if you want view the detailed smart playback icons, click
camera for playback (the record time scale will show the record data of the checked record type only after the above operations).
Introduction of the record time scale (area ⑤):
Click
to set the date; click
A tool bar will appear after moving the mouse to the record time scale. Click
24 hours' ratio. Drag the timeline or slide the scroll wheel of the mouse on the time scale to show the hidden time on the top or bottom of the
timeline. You can also click
timeline. Drag the slider at the bottom of the time scale to show the hidden playback cameras.
The record time scale shows different record types with different colors. The green blockstands for manual record, red block stands for sensor
based record, yellow block stands for motion based record, blue block stands for schedule record and cyan block stands for intelligence record.Click
the record blockto set the time and then the playback camera will play the record from the time you set.
Drag the color block on the time scale to select the backup area and then right click the area or click
Click
button in the window to pop up the export window. Select the device, export path and format and then click "Export" button to start the
backup.
8.3 Smart Playback
In the playback interface, click
The descriptions of buttons in the smart playback interface
Close Camera
Click it to close the playback camera.
to set the time and then the playback camera will play the record from the time you set. You can check the
: manual record;
: sensor based record;
to set the time and then the playback camera will play the record from the time you set.
to show the hidden time on the top of the timeline or click
to go to the smart playback interface as shown below.
按钮
Full screen motion button.
Draw grid. You can search the record of motion detection in the pre-defined
area.
Draw line. You can search the record of crossing the line after drawing the
line.
Draw quadrilateral. You can search the record in this quadrilateral after
drawing it.
Search by face
Search by license plate number
Playback settings button
Return button. Click to return to the previous interface.
on the tool bar at the bottom of the interface to clear all the playback
: motion based record;
to switch). Finally, click
/
to zoomthe timeline; click
to show the hidden time on the bottom of the
Description
39
NVR User Manual
: schedule record;
in the playback window to add
to recover the timeline to
to pop up anexport information window.
: AI
Advertisement
Table of Contents
