PTZ
NVR User Manual
In the "Add Cruise" window, select the cruise group name. After that, click "Play" to play the cruise groups in sequence.
➢
Trace Settings
On the right panel, click
to go to the trace settings tab. Click "Add" to add the trace name. Then click "OK" to save this name. Please refer to
the following picture:
After that, click "Start Record" to record the trace. Then click "Stop Record" to finish recording. Click
to play the recorded trace. Click
to
delete the trace.
6.2 Preset Settings
Click Start→Settings→Camera→PTZ→Preset to go to the interface as shown below.
29