Control Panel - Panasonic NU-SC280W Operating Instructions Manual

Control Panel

Display Window:
A: Accessories Placing Position
B: Child Safety Lock
C: Normal Working Icon
D: Steam System Cleaning
Function, Citric Acid
Cleaning Function
E: Full Water Icon (when using
steam function)
F: Steam Shot Icon
G: With Preheat Icon
H: Preheat End Icon
Mode:
Three modes of steam cooking:
Steam High ...................................... (See page 10)
Steam Med ...................................... (See page 10)
Steam Low ....................................... (See page 10)
Healthy Fry .............................................(See page 11)
Ferment ................................................. (See page 12)
Stew....................................................... (See page 13)
Convection ....................................... (See page 14-15)
Beep Sound:
Times
None Did not or could not accept the instruction
Once Accept the instruction
Between programmed stages to prompt
Twice turn over, stir, rearrange foods or error
message during cooking
Three times After preheating for manual setting
Long time
After preheating for auto menu setting
beeps
Five times End of any completed program
Notes:
1. The above illustration is for reference only,
please subject to the actual product.
2. After 6 minutes without operation after setting the
cooking program, including opening or closing
the oven door, the program will automatically
be cancelled and revert back to " " or enter
standby mode. If the oven is used for another
time without being unplugged and plugged in
again, the last program will be displayed.
3. : This illustration is placement of metal tray
for auto cook menus.
F0003CS80HP_eng.indd 9
A
D

C
Results
- Eng-9 -

B
E F G
Steam Conv. .................................... (See page 16-17)
Auto Menus ...................................... (See page 20-24)
Stop / Reset pad
Start / Set pad
Dial

Function Setting
To select a function which you desired.
Menus Setting
To choose desired menu among auto menus.
Time Setting
To set the time of cooking.
Weight/Serving/Level Setting
To set desired cooking weight/serving/level
among auto menus.
Temperature Setting
To set the temperature of Ferment/Convection
and Steam Conv.
Note: To ensure safety, the convection
temperature will gradually decrease to 230 °C
when using above 230 °C in cooling and remaining
10 minutes. If you continue to use above 230 °C,
cooking time will shorter. This not infl uence its
performance.
  
H
2022/11/17 15:55:15