Advertisement
Programming
Banner Name (Factory set to CURTIS)
Banner Name
Press
This feature allows up to 14 letters to be programmed for company name or regional name. Programming all blanks
disables Banner Name. If programmed, Banner Name is displayed every 5 sec. on and off.
P-Maintenance (Factory set to OFF)
Press
Press
Beeper On/Off (Factory set to ON)
Beeper On/Off
Press
allows you to hear a short beep each time a button is pressed.
Quality Timer (Factory set to OFF)
Quality Timer
Press
hours in 1 hour increments. Press
Display Brew Time (Factory set to ON)
Display Brew
Time
Press
Display Messages
Press
Model Select (Factory set to 1/Half Batch)
Press
Exit
Press
Tank Temperature Check
Turn on brewer at the control panel ON/OFF button. Press and hold
Error Message
With G3/Gold Cup Series brewers, there are three error messages that can appear on the screen to advise the user of a malfunction. If one of
these error messages appear, the brewer will lock up and stop functioning until the error is corrected.
An error message will occur under the following conditions:
minutes.
The screen may display a phone number to call for service. After the malfunction is corrected, the error message must be
cleared. To reset the control panel and return to normal operation, press
to display letters and change letters or < to move place and EX to exit when complete
to Select, Set gallons brewed to indicate P-Maintenance. Press < or > to adjust from Off to 3000 gallons.
to exit.
to display ON or OFF. Pressing either < or > toggles between on and off.
to Select. By pressing < or > buttons, you can increase and decrease time. Setting range is from 0 to 10
to Select. Pressing < or > toggles between ON and OFF.
to display ON or OFF. Pressing either < or > toggles between on and off. This feature allows the operator to
to Select. Pressing < or > toggles between 1/Half Batch and 3-Batch.
to select, exits program mode and returns unit to operation. Pressing > returns you to Tea Recipes.
to set. When ON, this feature
for 5 seconds.
Advertisement
