Advertisement
TEA TIPS
WARNING DO NOT
refrigerate unused
tea overnight for later
consumption.
CLEANING
brew cone comes with
a screen; clean the
screen to maintain the
eventually cause the brewcone to
unit.
CAUTION: DO NOT
use undiluted bleach or
chlorine.
LIQUID LEVEL
PROBE
1. Store tea bags in a dark, cool and dry place away from strong odors and moisture. Do not refrigerate.
tea after eight hours
3. Brew only enough tea that you reasonably expect to serve within a few hours.
storage and dispensing equipment at least once a day.
Regular cleaning of your airpots and tea containers will maintain the highest quality coffee and iced tea
your equipment is capable of producing. A proper cleaning is essential in preserving the appearance of the
brewer.
1. Turn off the tea brewer at the ON/OFF button on the front control panel.
3. Slide the brewcone out and clean it. Thoroughly soap the sprayhead area with a mild detergent solu-
tion.
areas. Wash both parts with a detergent solution or put these parts through a dishwasher.
5. Wash the tea container and top cover. Use a detergent solution and a soft bristled brush to clean inside
the container. Wipe the exterior surfaces with a sponge and detergent solution. Rinse thoroughly.
the same brush clean the faucet body inlet and outlet. Clean the faucet cap and silicone seat cup.
A. Use a clean container to submerge all parts. Wear rubber gloves for protection.
Let the parts soak for at least one minute.
liner with vinegar and allow to soak.
Cleaning intervals for the probe are to be determined by the user or the service tech based on water condi-
Intervals can be from one month to several years, however, replacing rather than cleaning the probe is
preferable.
WARNING: Disconnect electrical power before removing access panels.
CAUTION: This procedure involves working with hot water and hot surfaces.
1. Unplug the power cord and shut off the water line.
remove the cover.
5. Clean the tip of the probe using a Scotch-Brite scuff pad.
and soak it in vinegar or a scale removing chemical. Repeat this step
until the white layer is removed.
Advertisement
