Advertisement
original lead free solder.
- Remove the remaining lead free solder on the PCB cleanly for
soldering of the new IC.
- Since the melting point of the lead free solder is higher than that of
the normal lead solder, it takes the longer time to melt the lead free
solder.
- Use the soldering iron (more than 70W) equipped with the
temperature control after setting the temperature at 350±30
degrees C (662±86°F).
Recommended Lead Free Solder (Service Parts Route.)
- The following 3 types of lead free solder are available through the
service parts route.
RFKZ03D01K-----------(0.3mm 100g Reel)
RFKZ06D01K-----------(0.6mm 100g Reel)
RFKZ10D01K-----------(1.0mm 100g Reel)
Note
* Ingredient: tin (Sn), 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1
to 0.3%
2.3. Caution for AC Cord (RJA0053-3X type)
2.3.1. Information for your safety
IMPORTANT
Your attention is drawn to the fact that recording of pre-recorded tapes or discs or other
published or broadcast material may infringe copyright laws.
WARNING
To reduce the risk of fire or shock hazard, do not expose this
equipment to rain or moisture.
CAUTION
To reduce the risk of fire or shock hazard and annoying
interference, use the recommended accessories only.
FOR YOUR SAFETY
DO NOT REMOVE THE OUTER COVER
To prevent electric shock, do not remove the cover. No user serviceable parts inside. Refer
5
Advertisement
