Advertisement
6.2. Service Menu
When abnormal detection contents are confirmed a When I do the following operation automatic
diagnosis code is displayed.
1. Preparation
(1) Remove the card and disc from this unit.
2. To enter the Service Menu. (see
(1) Turn on power and set the Mode Dial to [DISC PLAYBACK
MODE].
(2) Pushed [DELETE] button, [JOYSTICK CONTROL LEFT] button
and [RECORDING START/STOP] button simmultaneously for 3
seconds.
3. To select the Item.
(1) Press the [JOYSTICK CONTROL UP/DOWN] to select item [2]
or [5].
(2) Press the [JOYSTICK CONTROL RIGHT] to display [YES/NO]
screen.
(3) Press the [JOYSTICK CONTROL UP/DOWN] to select [YES].
(4) Press the [JOYSTICK CONTROL CENTER].
4. To exit the Service Menu.
(1) Unplug the AC Cord.
Fig.
S1)
Fig. S1
13
Advertisement
