Panasonic VDR-D250EG Service Manual page 19

No. Item / Part Fig.
7 FRONT Fig. D16
P.C.B.
8 LCD UNIT Fig. D17
Fig. D18
9 SIDE R Fig. D19
UNIT, SIDE
R P.C.B.
10 MONITOR Fig. D20
P.C.B.
Fig. D21
Fig. D22
11 EVF UNIT Fig. D23
12 EVF P.C.B. Fig. D24
Fig. D25
Fig. D26
13 JACK P.C.B. Fig. D27
Operation Unit
Removal
(Screw,Connector,FPC. &
Other)
3-Screws (R)
Front P.C.B.
2-Screws (T)
Side R Piece
1-Screw (U)
LCD Open SW
Open the LCD, and Turn
the LCD.
2-Screws (V)
LCD Unit, 2-Earth Plates
5-Screws (W)
Speaker Plate
Side R Unit, Side R P.C.B.
2-Screws (X)
6-Tabs
LCD Case A unit
FP902
Shaft Case Unit, LCD
Earth Spring
FP903
3-Tabs
Monitor P.C.B.
1-Screw (Y)
Roll up the EVF FPC, and
pull out the EVF Unit in
the direction of the arrow.
Rib (1) of EVF Case Unit
removed from the slot of
EVF Slide Base Unit, Rib
(2) of EVF Case Unit is
removed by twisting EVF
Case Unit in the direction
of the arrow.
EVF Case Unit, EVF Slide
Base Unit
2-Tabs
EVF LCD Panel Unit
FP952
4-Tabs
EVF P.C.B.
1-Screw (Z)
B7001, B2
Jack P.C.B.
19