Table of Contents
Advertisement
Step 1
Turn off the oven and wait until it is
cold.
Step 2
Pull the front of the shelf support
away from the side wall.
Step 3
Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4
Install the shelf supports in the oppo‐
site sequence.
11.3 How to use: Catalytic cleaning
The cavity is coated with catalytic enamel. It
absorbs fat during catalysis.
Turn off the oven and wait until it is
cold.
Step 1
To clean the top oven set the
function:
.
To clean the main oven set
the function:
.
11.4 How to remove and install:
Door
You can remove the door and the internal
glass panels to clean it. The number of glass
panels is different for different models.
WARNING!
The door is heavy.
20
ENGLISH
Before the catalytic cleaning
Remove all accessories and remova‐
ble shelf supports.
Clean the oven with catalytic cleaning
Step 2
Set the maximum oven
temperature.
Duration: 1 h
1
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
Clean one oven at a time.
Clean the oven floor and the inner
door glass with warm water, soft
cloth and mild detergent.
Step 3
After cleaning, turn the
knob for the oven func‐
tions to the off position.
CAUTION!
Carefully handle the glass, especially
around the edges of the front panel. The
glass can break.
2
Step 4
When the oven is cold,
clean the cavity with a
wet soft cloth.
Advertisement
Table of Contents
