Panasonic PT-D7700 Operating Instructions Manual page 94

How to use network module (optional)
Network setting page
Advanced control page
Pressing these buttons controls the projector and
updates the on-screen description on the right of
the control page when control is finished.
94
Enter the projector name. Enter this field when the host name
is required such as when to use the DHCP server.
This button updates the on-screen
description on the right of the control
page with the latest information.
Select ON to enable the
DHCP client function.
Enter the IP address if
DHCP server is not used.
Enter the port number.
Normally use the value of
80 as indicated.
Enter the net mask if
DHCP server is not used.
Enter the gateway address
if DHCP server is not used.
On-screen status is
displayed, even if the
on-screen of projector is
set to off.