Initial Setting Of Network Module - Panasonic PT-D7700 Operating Instructions Manual

Initial setting of network module

Procedure of setting
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
:MENU SELECT
ENTER:SUB MENU
OPTION
PROJECTOR ID
SETTING
LAMP SELECT
LAMP POWER
RS232C SETTING
OSD POSITION
SYSTEM INFORMATION
COLOR MATCHING
VIDEO SETTING
NETWORK SETTING
:MENU SELECT
ENTER:SUB MENU
NETWORK SETTING
HOST NAME
DHCP
IP ADDRESS
PORT
NET MASK
GATEWAY
MAC ADDRESS
STORE
:MENU SELECT
ENTER:ADJUST
2
FRONT-F
DUAL
HIGH
2
3COLORS
PROJECTOR
OFF
192.168. 0. 8
80
255.255.255. 0
192.168. 0. 1
00.00.00.00.00.00
Press the "MENU" button.
The MAIN MENU screen will be displayed.
Select "OPTION" with the
buttons.
Press the "ENTER" button.
The OPTION screen will be displayed.
Select "NETWORK SETTING" with the
buttons.
Press the "ENTER" button.
The NETWORK SETTING screen will be
displayed.
Select items with the
press the "ENTER" button to change
the setting.
Select the "STORE" with the
buttons and press the "ENTER" button
twice.
The on-line lamp of network module turns off and
then turns on.
Note
• It takes about two minutes for the setting to be
reflected in the system.
• Do not turn off the main power supply until the on-
line lamp of network module turns on again.
buttons and
(Continued on next page)
91