Adjusting The Color Temperature - Panasonic PT-D7700 Operating Instructions Manual

Dlp based projector for commercial use
Hide thumbs Also See for PT-D7700:
Table of Contents

Advertisement

Adjusting the color temperature

Adjustment procedure (to be performed while projecting the signals to be adjusted)
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
PICTURE
PICTURE MODE
COLOR
TINT
COLOR TEMP.
GAMMA
CONTRAST
BRIGHT
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
:MENU SELECT
:CHANGE
WHITE BALANCE
WHITE BALANCE HIGH
WHITE BALANCE LOW
WHITE BALANCE HIGH
R
G
B
Item
Operation
Press
R (Red)
Press
Press
G (Green)
Press
Press
B (Blue)
Press
Note
• All colors will not be displayed properly unless adequate adjustment is made.
If the adjustment is not successful, press "STD" (standard) button when the individual adjustment
screen is displayed to restore the factory default setting only for the displayed item.
• The color temperature cannot be adjusted for the internal test pattern (refer to page 85). Be sure to
project the input signal when adjusting the color temperature.
• When any setting other than "OFF" has been selected for color matching, the COLOR TEMP. setting is
fixed at "USER1"
• "DEFAULT" cannot be selected when the picture mode has been set to "USER"
DYNAMIC
50
30
DEFAULT
2.2
32
32
6
2
1
255
255
255
Deepens red.
button
Weakens red.
button
Deepens green.
button
Weakens green.
button
Deepens blue.
button
Weakens blue.
button
Press the "MENU" button.
The MAIN MENU screen will be displayed
Select "PICTURE" with the
buttons.
Press the "ENTER" button.
The PICTURE screen will be displayed.
Select "COLOR TEMP." with the
buttons.
Select the desired setting from below
with the
buttons.
"LOW", "MIDDLE", "HIGH", "DEFAULT", "USER1"
and "USER2"
<To further adjust toward the desired white balance>
Select "USER1" or "USER2" in Step
Press the "ENTER" button.
Select "WHITE BALANCE HIGH" or
"WHITE BALANCE LOW" with the
buttons.
Press "ENTER" button.
The WHITE BALANCE HIGH (LOW) screen will be
displayed.
Select "R", "G" or "B" with the
buttons.
Adjust the level with the
Adjustment
.
buttons.
Remarks
Maximum value 255
Minimum value 0
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents