Subscribe to Our Youtube Channel
Related Manuals for Seagate IRONWOLF PRO ST6000NE0023
Summary of Contents for Seagate IRONWOLF PRO ST6000NE0023
- Page 1 v6 SATA Product Manual Standard models ST6000NE0023 ST4000NE0025 ST2000NE0025 100803998, Rev. G February 2018...
- Page 2 Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. PowerChoice and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments.
-
Page 3: Table Of Contents
Product warranty ................24 Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... - Page 4 S.M.A.R.T. commands............. . 35 Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G...
-
Page 5: Seagate ® Technology Support Services
For information regarding online support and services, visit: http://www.seagate.com/contacts/ For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery services, visit: http://www.seagate.com/services-software/recover/ For Seagate OEM, Distribution partner and reseller portals, visit: http://www.seagate.com/partners/ Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... -
Page 6: Introduction
Shadow Register Block. All Serial ATA devices behave like Device 0 devices. For additional information about how Serial ATA emulates parallel ATA, refer to the “Serial ATA: High Speed Serialized AT Attachment” specification. The specification can be downloaded from www.serialata.org. Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... -
Page 7: Drive Specifications
(below mean sea level, max) (–1000 ft to 40,000+ ft) Operational Shock (max at 2 ms) Read 70 Gs / Write 40 Gs Non-Operational Shock (max at 2 ms) 250 Gs 300 Gs Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... -
Page 8: Formatted Capacity
** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. † Seagate does not recommend operating at sustained case temperatures above 60°C. Operating at higher temperatures will reduce useful life of the product. -
Page 9: Start/Stop Times
Spindle speed (RPM) (± 0.2%) 7200 Internal data transfer rate (Mb/s max) 2396 2585 Sustained data transfer rate (MiB/s max) I/O data-transfer rate (MB/s max) 600 (Ultra DMA mode 5) Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... -
Page 10: Power Specifications
9.01 Maximum DC 0.611 0.500 9.06 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... - Page 11 7.33 Maximum DC 0.448 0.430 7.40 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G...
- Page 12 6.10 Maximum DC 0.523 0.302 6.24 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G...
-
Page 13: Conducted Noise
• Using 5V power, the drive is expected to operate with a maximum of 100mV peak-to-peak square-wave injected noise at up to 10MHz. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current. Note 2.5.3 Voltage tolerance Voltage tolerance (including noise): 5V ±5% 12V ± 10% Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... -
Page 14: Extended Power Conditions - Powerchoicetm
• Saved enabled state, and timer value • Current enabled state, and timer value S.M.A.R.T. Read Data Reports • Attribute 192 - Emergency Retract Count • Attribute 193 - Load/Unload Cycle Count Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... - Page 15 Disable EPC Feature Set PowerChoice Supported Extended Power Condition Identifiers Power Condition Identifiers Power Condition Name Standby_z 01 - 80 Reserved Idle_a Idle_b Idle_c 84 - FE Reserved All EPC Power Conditions Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G...
-
Page 16: Environmental Limits
Non-operating –40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive. Temperature Check Point Figure 2. -
Page 17: Shock
The maximum non-operating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below. 2–500 Hz 2Hz/.001g (Random psd) 4Hz/.03g 100Hz/.03g 500Hz/.001g Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... -
Page 18: Acoustics
Test for Prominent Discrete Tones (PDTs) Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (originated in ISO 389-7) to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards. -
Page 19: Reliability
US, please visit our website for numbers in your local and language: http://www.seagate.com/services-software/recover/resources/. An SRS representative will review your case to confirm your eligibility, and to assess whether your data may be recoverable by remote recovery services or whether you will need to send your device to SRS for in-lab servicing. - Page 20 Seagate reserves the right to refuse service to or the return of any storage devices that have been determined to violate these regulations.
-
Page 21: Agency And Safety Certifications
Judicial Arbitration and Mediation Services. Each party will bear its own costs in arbitration, provided that Seagate reserves the right, in its discretion, to pre-pay certain fees you may incur in connection with the arbitration subject to refund if you do not prevail. -
Page 22: South Korean Kc Certification Mark
2.12.5 Morocco Commodity Mark To satisfy our OEM customers, Seagate has added the Moroccan Commodity Mark to the drives provided to the OEM for the sale of Customer Kits produced by our OEM customers that are intended to be incorporated into the OEM's finished system-level product by an end user. -
Page 23: Environmental Protection
2.13.1.1 Restriction of Hazardous Substances in Electrical and Electronic Equipment Seagate drives are designed to be compliant with the European Union RoHS "Recast" Directive 2011/65/EU (RoHS 2) as amended by Directive (EU) 2015/863. The RoHS2 restricts the use of certain hazardous substances such as Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated Biphenyls (PBB) and Polybrominated Diphenyl Ether (PBDE), BisBis(2-Ethylhexyl) phthalate (DEHP), Benzyl butyl phthalate (BBP), Dibutyl phthalate (DBP), and Diisobutyl phthalate (DIBP) in electrical and electronic equipment (EEE). -
Page 24: Taiwan Requirements - Taiwan Rohs
The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives. Seagate recommends that data centers be kept clean by monitoring and controlling the dust and gaseous contamination. Gaseous contamination should be within ANSI/ISA S71.04-2013 G2 classification levels (as measured on copper and silver coupons), and dust contamination to ISO 14644-1 Class 8 standards, and MTBF rated conditions as defined in the Annualized Failure Rate (AFR) and Mean Time Between Failure (MTBF) section. -
Page 25: Product Warranty
Seagate’s option and at no charge to the customer, if returned by customer at customer’s expense to Seagate’s designated facility in accordance with Seagate’s warranty procedure. -
Page 26: Configuring And Mounting The Drive
For installations which require cables, users can connect the drive as illustrated in Figure 3. Figure 3. Attaching SATA cabling Each cable is keyed to ensure correct orientation. IronWolf Pro Serial ATA drives support latching SATA connectors. Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... -
Page 27: Drive Mounting
1.028 MAX CHECKPOINT 60°C MAX 26.11 MM Figure 4. Mounting configuration dimensions (6TB & 4TB) The image is for mechanical dimension reference only and may not represent the actual drive. Note Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... - Page 28 0.14 0.14 Figure 5. Mounting configuration dimensions (2TB) The image is for mechanical dimension reference only and may not represent the actual drive. Note Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G...
-
Page 29: Serial Ata (Sata) Interface
There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate backplane config- uration. All used voltage pins (V ) must be terminated. Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... -
Page 30: Supported Ata Commands
Sanitize Device - Freeze Lock Ext / 0020 Sanitize Device - Status Ext / 0000 Security Disable Password Security Erase Prepare Security Erase Unit Security Freeze Security Set Password Security Unlock Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... - Page 31 Write FPDMA Queued Write Log DMA Ext Write Log Extended Write Multiple Write Multiple Extended Write Multiple FUA Extended Write Sectors Write Sectors Without Retries Write Sectors Extended Write Uncorrectable Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G...
-
Page 32: Identify Device Command
LBAs specified in words 100-103. This is required for drives that support the 48-bit addressing feature. Retired 0000 Multiword DMA active and modes supported (see note following this table) xx07 Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... - Page 33 NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN support. 112–118 ATA-reserved 0000 Commands and feature sets supported 410E Commands and feature sets supported or enabled 409C 121-127 ATA-reserved 0000 Security status 0021 129–159 Seagate-reserved xxxx Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G...
- Page 34 Ultra DMA mode 2 is currently active. Ultra DMA mode 3 is currently active. Ultra DMA mode 4 is currently active. Ultra DMA mode 5 is currently active. Ultra DMA mode 6 is currently active. Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G...
-
Page 35: Set Features Command
Enable read look-ahead (read cache) feature (default). Report full capacity available At power-on, or after a hardware or software reset, the default values of the features are as indicated above. Note Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... -
Page 36: Commands
S.M.A.R.T. Disable Operations S.M.A.R.T. Return Status If an appropriate code is not written to the Features Register, the Note command is aborted and 0x 04 (abort) is written to the Error register. Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G... - Page 37 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00 Publication Number: 100803998, Rev. G...
Need help?
Do you have a question about the IRONWOLF PRO ST6000NE0023 and is the answer not in the manual?
Questions and answers