The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 3 on page 25.
2.5.1
Power consumption
Power requirements for the drives are listed in Table 2 through Table 4. Typical power measurements are based on an average of
drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature.
Table 2
DC power requirements (6TB)
Voltage
Regulation
Avg Idle Current *
Advanced Idle Current *
Idle_A
Idle_B
Idle_C
Standby
Peak operating current (random read):
Typical DC
Maximum DC
Peak operating current (random write)
Typical DC
Maximum DC
Peak operating current (sequential read)
Typical DC
Maximum DC
Peak operating current (sequential write)
Typical DC
Maximum DC
*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.
Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. G