Baumatic BW300SS Instruction Manual page 20

1) Remove the hinge screws (1), upper left hand hinge (2) and
upper right hand hinge (3) from the appliance, using a Phillips
head screw driver (S1).
2) Remove the wine cooler door (8) from the appliance and place it
onto a cushioned surface so that damage does not occur to it.
3) Remove the upper door pin (4) from the top of the door, using a
flat head screwdriver (S2).
4) Remove the lower left hand hinge screws (6) and then the lower
hinge and pin (5) from the right hand side of the cabinet. Then
fix them onto the opposite side of the cabinet, ensuring that the
screws are fully tightened.
5) Fix the upper left hand hinge (2) to the opposite side of the
cabinet using the hinge screws (1), ensuring that the screws are
fully tightened.
6) Fix the upper right hand hinge (3) to the opposite side of the
cabinet using the hinge screws (1), ensuring that the screws are
fully tightened.
7) Rotate the wine cooler door (8) through 180° and then place it
onto the lower hinge and pin (5). IMPORTANT: Ensure that the
pin is fully inserted into the hole in the bottom of the wine cooler
door.
8) Insert the upper right hand hinge (3) into the top of the wine
cooler door (8).
20