Z-wave smart switch with power measurement (30 pages)
Summary of Contents for Shelly RGBW 2
Page 1
VERSION FW3 Shelly RGBW 2 With Apple HomeKit Support Crypto services s.r.o. WWW.VOLTIO.CZ SHELLY RGBW 2...
Page 2
• Connecting Accessories to the HomeKit • Entering Setup Mode • Change WiFi Network • Reconnecting to WiFi Network • Reset HomeKit ID • Remove WiFi Settings • Saving Changes • Factory Reset • Questions and Answers? • Specifications Device Connection WWW.VOLTIO.CZ SHELLY RGBW 2...
Page 3
To be able to operate the switch remotely, we must first connect it to the home wifi network. The picture below shows that Shelly creates its own wifi network. 1. Go to your wifi network settings on your mobile device (iPhone, iPad or MacBook).
Page 4
6. If you cannot add your device to HomeKit because you don’t see it in available devices, unplug it and plug it in after a while. If this does not help, reset the switch to the factory settings here. WWW.VOLTIO.CZ SHELLY RGBW 2...
If your SSID is hidden then you can enter its details manually by clicking on the Enter SSID manually button. You will then be prompted to enter an SSID and a password. Make sure you enter both correctly. WWW.VOLTIO.CZ SHELLY RGBW 2...
Page 6
1. Remove your device from the Home App 2. Turn Off Your WiFi Network 3. Enter Setup Mode on the device 4. Select Reset HomeKit ID 5. Turn On Your WiFi Network 6. Select Connect 7. Pair the device with your Home App again. WWW.VOLTIO.CZ SHELLY RGBW 2...
7. Select Connect 8. Pair the device with your Home App again. Saving Changes Save Clicking will save any changes you have made while in setup mode, apply them and reboot the device to use them. WWW.VOLTIO.CZ SHELLY RGBW 2...
Recommendation: If you are running multiple routers in your home, leave only one device turned on and turn off the others. Even though the device appears to be a single WiFi network, it can cause you a problem connecting the device. WWW.VOLTIO.CZ SHELLY RGBW 2...
5%-90% RH, Non-condensing Wireless Standard: 802.11 b/g/n Security Mechanism: WPA-PSK/WPA2-PSK Operating Temperature: 0ºC-40ºC (32°F-104°F) Color: Yellow Gang: Contact If you have any questions contact us on e-mail: info@cryptoservices.cz For a faster response to queries, use our messenger: m.me/voltio.cz WWW.VOLTIO.CZ SHELLY RGBW 2...
Need help?
Do you have a question about the RGBW 2 and is the answer not in the manual?
Questions and answers