Gigabyte MS73-HB2 User Manual page 74

Parameter
CPU C State Control
Package C State Control
CPU - Advanced PM Tuning
(Note) This item is configurable when Power Performance Tuning is set to BIOS Controls EPB.
Description
Press [Enter] to configure advanced items.
Enable Monitor MWAIT
Š
– Allows Monitor and MWAIT instructions.
– Options available: Disable, Enable, Auto. Default setting is Auto.
CPU C6 Report
Š
– Enable/Disable CPU C6(ACPI C3) report to OS.
– Options available: Disable, Enable, Auto. Default setting is Auto.
Enhanced Halt State (C1E)
Š
– Core C1E auto promotion control. Takes effect after reboot.
– Options available: Enable, Disable. Default setting is Enable.
Press [Enter] to configure advanced items.
Package C State
Š
– Configures the state for the C-State package limit.
– Options available: C0/C1 state, C2 state, C6(non Retention) state,
C6(Retention) state, No Limit, Auto. Default setting is Auto.
Press [Enter] to configure advanced items.
Energy Perf BIAS
Š
– Press [Enter] to configure advanced items.
Power Performance Tuning
»
• Options available: OS Controls EPB, BIOS Controls EPB,
PECI Controls EPB. Default setting is OS Controls EPB.
Energy_PERF_BIAS_CFG mode
»
• Options available: Performance, Balanced Performance,
Balanced Power, Power. Default setting is Balanced
Performance.
BIOS Setup
- 74 -
(Note)