Gigabyte MS73-HB2 User Manual page 51

Parameter
Device Configuration Menu
(continued)
MBA Configuration Menu
Description
Support RDMA
Š
– Enable/Disable RDMA support for this port.
– Options available: Enabled, Disabled. Default setting is Disabled.
DCB Protocol
Š
– Enable/Disable DCB protocol.
– Options available: Disabled, Enabled (IEEE only), CEE (only), Both
(IEEE preferred with fallback to CEE). Default setting is Disabled.
LLDP nearest bridge
Š
– Enable/Disable LLDP nearest bridge state.
– Options available: Enabled, Disabled. Default setting is Enabled.
Default EVB Mode
Š
– Configures the default Edge Virtual Bridging mode.
– Options available: VEB, VEPA, None. Default setting is VEB.
Enable PME Capability
Š
– Enable/Disable PME Capability support.
– Options available: Enabled, Disabled. Default setting is Enabled.
Flow Offload
Š
– Options available: Enabled, Disabled. Default setting is Disabled.
Live Firmware Upgrade
Š
– Options available: Enabled, Disabled. Default setting is Disabled.
Adapter Error Recovery
Š
– Options available: Enabled, Disabled. Default setting is Disabled.
Press [Enter] to configure advanced items.
Option ROM
Š
– Enable/Disable Boot Option ROM.
– Options available: Enabled, Disabled. Default setting is Enabled.
Legacy Boot Protocol
Š
– Selects non-UEFI Boot Protocol: Preboot Execution Environment
(PXE)/iSCSI.
– Options available: PXE, iSCSI, NONE. Default setting is PXE.
Boot Strap Type
Š
– Selects the boot strap type. Options available: Auto Detect, BBS,
Int 18h, Int 19h. Default setting is Auto Detect.
Hide Setup Prompt
Š
– Configures whether the Setup Prompt is displayed during ROM
initialization.
– Options available: Enabled, Disabled. Default setting is Disabled.
Setup Key Stroke
Š
– Configures key strokes to invoke the configuration menu.
– Options available: Ctrl-S, Ctrl-B. Default setting is Ctrl-S.
Banner Message Timeout
Š
– Selects the timeout value. (0 defaults to 4 seconds, 15 is no delay,
1-14 is timeout value in seconds)
– Default setting is 5.
BIOS Setup
- 51 -