Processor Configuration - Gigabyte MS73-HB2 User Manual

Parameter
Processor Configuration
Pre-Socket Configuration
Processor Socket / Processor ID
/ Processor Die Type / Processor
Frequency / Processor Max Ratio
/ Processor Min Ratio / Microcode
Revision / L1 Cache RAM(Per
Core) / L2 Cache RAM(Per Core)
/ L3 Cache RAM(Per Package) /
Processor # Version
Enable LP [Global]
Hardware Prefetcher
L2 RF0 Prefetch Disable
Adjacent Cache Prefetch
DCU Streamer Prefetcher
DCU IP Prefetcher
Extended APIC
Enable Intel(R) TXT
VMX
Enable SMX
AES-NI
Debug Consent
Description
Press [Enter] to configure advanced items.
CPU Socket 0 Configuration
Š
– Core Disable Bitmap(Hex)
• Number of Cores to enable. 0 means all cores. FFFFFFF
means to disable all cores. The maximum value depends on
the number of CPUs available. Press the numeric keys to
adjust desired values.
Displays the technical specifications for the installed processor(s).
Enables Logical processor (Software Method to Enable/Disable Logical
Processor threads).
Options available: ALL LPs, Single LP. Default setting is ALL LPs.
Select whether to enable the speculative prefetch unit of the processor.
Options available: Enable, Disable. Default setting is Enable.
Options available: Enable, Disable. Default setting is Disable.
When enabled, cache lines are fetched in pairs. When disabled, only
the required cache line is fetched.
Options available: Enable, Disable. Default setting is Enable.
Enable/Disable DCU streamer prefetcher.
Options available: Enable, Disable. Default setting is Enable.
Enable/Disable DCU IP Prefetcher.
Options available: Enable, Disable. Default setting is Enable.
Enable/Disable extended APIC support. Note: The VT-d will be enabled
automatically when x2APIC is enabled.
Options available: Enable, Disable. Default setting is Enable.
Enable/Disable the Intel Trusted Execution Technology support function.
Options available: Enable, Disable. Default setting is Disable.
Enable/Disable the Vanderpool Technology. This will take effect after
rebooting the system.
Options available: Enable, Disable. Default setting is Enable.
Enable/Disable the Safer Mode Extensions (SMX) support function.
Options available: Enable, Disable. Default setting is Disable.
Enable/Disable the AES-NI support.
Options available: Enable, Disable. Default setting is Enable.
Options available: Enable, Disable. Default setting is Disable.
BIOS Setup
- 63 -