Table of Contents
Advertisement
2-2-12-1 iSCSI Boot Configuration Menu
Parameter
iSCSI General Parameters
Description
Press [Enter] to configure advanced items.
TCP/IP Parameters via DHCP
Š
– Acquires TCP/IP Parameters via DHCP.
– Options available: Enabled, Disabled. Default setting is Enabled.
IP Autoconfiguration
Š
– Auto-configures the IP configuration.
– Options available: Enabled, Disabled. Default setting is Enabled.
iSCSI Parameters via DHCP
Š
– Acquires iSCSI Parameters via DHCP.
– Options available: Enabled, Disabled. Default setting is Disabled.
CHAP Authentication
Š
– Enable/Disable the CHAP authentication.
– Options available: Enabled, Disabled. Default setting is Disabled.
Boot to iSCSI Target
Š
– Enable/Disable booting to iSCSI target after log-on.
– Options available: Enabled, Disabled, One Time Disabled. Default
setting is Enabled.
DHCP Vendor ID
Š
– Configures the DHCP vendor ID (up to 32 characters long).
Link Up Delay Time
Š
– Configures the link up delay time in seconds (0-225).
BIOS Setup
- 53 -
Advertisement
Table of Contents
