Table of Contents
Advertisement
Parameter
MBA Configuration Menu
(continued)
iSCSI Boot Configuration
Menu
Blink LEDs
Link Status
Physical Link Speed
Chip Type
PCI Device ID
Bus:Device:Function
Permanent MAC Address
Virtual MAC Address
Restore Defaults
Description
Pre-boot Wake On LAN
Š
– Configures Pre-boot Wake on LAN (WOL).
– Options available: Enabled, Disabled. Default setting is Enabled.
VLAN Mode
Š
– Configures the virtual LAN (VLAN) mode.
– Options available: Enabled, Disabled. Default setting is Disabled.
VLAN ID
Š
– Configures the VLAN ID (1...4094).
– This item is available only when VLAN Mode is Enabled.
Boot Retry Count
Š
– Selects the number of boot retries.
– Options available: No Retry, 1 Retry, 2 Retries, 3 Retries, 4 Retries,
5 Retries, 6 Retries, Indefinite Retries. Default setting is 5 Retries.
Press [Enter] to configure advanced items.
Identifies the physical network port by blinking the associated LED.
Press the numeric keys to adjust desired values.
Specifies the link status of the port.
Displays the technical specifications for the Network Interface Controller.
Displays the technical specifications for the Network Interface Controller.
Displays the technical specifications for the Network Interface Controller.
Displays the technical specifications for the Network Interface Controller.
Displays the MAC address of the Ethernet controller.
Displays the virtual MAC address of the Ethernet controller.
Resets the adapter to factory defaults.
BIOS Setup
- 52 -
Advertisement
Table of Contents
