Table of Contents
Advertisement
1. SAFETY INFORMATION
REMEMBER: SAFETY IS NO ACCIDENT
These instructions contain both information
and warnings that are necessary for the safe
operation and maintenance of this product. It
is recommended that you read the instructions
carefully and ensure that the contents are
fully understood. Failure to understand and to
comply with the warnings and instructions can
result in serious injury, damage or even death.
Particular attention should be paid to the
Warnings, Precautions and Technical
Specifications.
Please keep these instructions for future
reference. Updated instructions and product
information are available at:
www.martindale-electric.co.uk
1.1 Meaning of Symbols and Markings
Caution - risk of danger & refer to
instructions
Caution - risk of electric shock
Equipment protected by double or
reinforced insulation (Class II)
Suitable for live working
Alternating current (AC)
CAT II (Measurement Category II) is applicable to
test and measuring equipment connected
directly to utilization points (socket outlets
and similar points) of the low-voltage MAINS
installation.
CAT III (Measurement Category III) is applicable
to test and measuring equipment connected
to the distribution part of the building's low-
voltage MAINS installation.
CAT IV (Measurement Category IV) is applicable
to test and measuring equipment connected
at the source of the building's low-voltage
MAINS installation.
For further information on measurement categories
visit www.martindale-electric.co.uk/measurement_
categories.php.
Equipment complies with relevant UK
Conformity Assessed marking
Equipment complies with relevant EU
Directives
End of life disposal of this equipment
should be in accordance with relevant
Directives
1
Advertisement
Table of Contents
