Safety Information; Meaning Of Symbols And Markings - Martindale Electric NC4 Instruction Manual

Dual range voltage tester
Table of Contents

Advertisement

1 SAFETY INFORMATION

SAFETY IS NO ACCIDENT
These instructions contain both information
and warnings that are necessary for the safe
operation and maintenance of this product. It
is recommended that you read the instructions
carefully and ensure that the contents are fully
understood. Failure to understand and to comply
with the warnings and instructions can result in
serious injury, damage or even death.
Particular attention should be paid to the Warnings,
Precautions and Technical Specifications.
Please keep these instructions for future reference.
Updated instructions and product information are
available at: www.martindale-electric.co.uk

1.1 Meaning of Symbols and Markings

Caution - risk of danger & refer to
instructions
Caution - risk of electric shock
Equipment protected by double or
reinforced insulation (Class II)
CAT IV (Measurement Category IV) is applicable
to test and measuring equipment
connected at the source of the building's
low-voltage MAINS installation.
For further information on measurement
categories visit
www.martindale-electric.co.uk
Equipment complies with relevant EU
Directives
End of life disposal of this equipment
should be in accordance with relevant
EU Directives
REMEMBER:
1

Advertisement

Table of Contents
loading

Table of Contents