Table of Contents
Advertisement
Chapter 6
1. Right click on the Live View screen and click
Smart Event Detection
2. Select the channel you want to detect and enable
3. Draw lines on the preview screen. Select the line and configure settings of line crossing detection.
Note: The maximum number of customized lines is 4. If you want to apply the settings for different
areas, select
Share intrusion area
Sensitivity
Line Crossing
Direction
Detection
4. Select the triggered actions according to your needs.
Screen Prompt
>
Line Crossing Detection.
parameters.
Set the sensitivity of line crossing detection. A higher value can trigger
alarm actions more easily.
A->B:
Only the object crossing the configured line from the A side to
the B side can be detected.
B->A:
Only the object crossing the configured line from the B side to
the A side can be detected.
A<->B:
The object goes across the configured line with both directions
can be detected.
Select the detection type. It can be configured only for the cameras
which support human detection and vehicle detection.
A warning sign
Enable it to check the event type and time.
Settings
in the pop-up main menu, then go to
Line Crossing
in the lower right corner of the monitor screen.
Events and Alerts
Detection.
Event
>
87
Advertisement
Table of Contents
