Table of Contents
Advertisement
Chapter 2
Port Settings
2. 7 Configure Pan&Tilt (Only for PT Cameras)
In Pan&Tilt, you can preset the positions, paths and pattern for each channel and call a preset to change
the status of lens quickly and conveniently. Also, you can enable Park to trigger the preset automatically
when there is no operation.
Note: Only the cameras with Pan&Tilt support this feature. Some of the Pan&Tilt features are only
supported by some models.
Click to configure port settings. Select the port, and set its power
priority, power status and maximum power.
Configure Your Network Camera
30
Advertisement
Table of Contents
