TP-Link VIGI NVR11104H-4P User Manual page 87

Chapter 6
1. Right click on the Live View screen and click
Smart Event Detection
2. Select the channel you want to detect and enable
3. Set the sensitivity of video tampering. A higher value can trigger the alarm actions more easily.
4. Select the triggered actions according to your needs.
Screen Prompt
Buzzer
Recording Linkage
Pop-up Alarm
Screen
Audible Alarm
> Video Tampering.
A warning sign
Click it to check the event type and time.
The buzzer on the NVR will beep when the video tampering is detected.
The channels you select for recording linkage will start recording when
the current channel detects the video tampering.
The channel in Live View will be in full screen when the video tampering
is detected.
(Only supports camera models with audible alarm) The buzzer on the
camera will alarm when the video tampering is detected.
Settings in the pop-up main menu, then go to
Video Tampering.
in the lower right corner of the monitor screen.
Events and Alerts
Event >
83