TP-Link VIGI NVR11104H-4P User Manual page 112

Chapter 8
• For Custom Diagnosis, select an operation and specify the parameters. Click
Operation
IP/Domain Name
Packet Number
Packet Size
Timeout
Hop Count
Diagnostic Results
Select an operation.
Ping: The NVR sends several packets to the specified IP address or
domain to test the connection between them.
Tracert: The NVR tries to trace the route to the specified IP address
or domain within limited hops and record the route.
Specify an IP address or a domain name to diagnose the connection.
(For Ping diagnose) Specify how many packets the NVR sends to
the specified IP/domain name.
(For Ping diagnose) Specify the size of packets.
(For Ping diagnose) Specify the maximum time that the NVR waits
for response of a ping packet. If no response is received after the
time, the ping packet will be regarded as lost.
(For Tracert diagnose) Specify the maximum hops when tracing the
route.
If you select Ping as the operation, the results show the statistics
of ping packets.
If you select Tracert as the operation, the results show the route
that the NVR traces to the specified IP address or domain name.
NVR Management
Start Diagnosis.
108