Related Manuals for Dahua Technology IPC-HUM8531M-V-LED-0360B
Summary of Contents for Dahua Technology IPC-HUM8531M-V-LED-0360B
- Page 1 Cube Network Camera Quick Start Guide ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.0.0...
-
Page 2: Foreword
Quick Start Guide Foreword General This manual introduces the installation and operation of network camera. Read carefully before using the device, and keep the manual safe for future reference. Safety Instructions The following signal words might appear in the manual. Signal Words Meaning Indicates a medium or low potential hazard which, if not avoided,... - Page 3 Quick Start Guide ● Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened. ● All trademarks, registered trademarks and the company names in the manual are the properties of their respective owners. ●...
-
Page 4: Important Safeguards And Warnings
Quick Start Guide Important Safeguards and Warnings This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using the device, and comply with the guidelines when using it. Transportation Requirements ●... - Page 5 Quick Start Guide against lightning. For outdoor scenarios, strictly comply with the lightning protection regulations. ● Ground the function earthing portion of the device to improve its reliability (certain models are not equipped with earthing holes). The device is a class I electrical appliance. Make sure that the power supply of the device is connected to a power socket with protective earthing.
- Page 6 Quick Start Guide ● Use the accessories suggested by the manufacturer. Installation and maintenance must be performed by qualified professionals. ● Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on the lens.
-
Page 7: Table Of Contents
Quick Start Guide Table of Contents Foreword ........................................I Important Safeguards and Warnings ............................III 1 Cable ........................................... 1 2 Network Configuration ..................................2 2.1 Initializing the Camera ................................2 2.2 Changing the Device IP Address ............................3 2.3 Logging in to Webpage ................................3 3 Installation ....................................... -
Page 8: Cable
Quick Start Guide 1 Cable Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and water damage. For the detailed operation, see FAQ manual. Figure 1-1 Cables Table 1-1 Cable information Port name Description Inputs 12 VDC power. -
Page 9: Network Configuration
Quick Start Guide 2 Network Configuration Device initialization and IP setting can be finished with the ConfigTool or on the webpage. For more information, see Web Operation Manual. ● Device initialization is available on select models, and it is required at first-time use and after the device is reset. -
Page 10: Changing The Device Ip Address
Quick Start Guide Step 3 Set and confirm the password of the devices, enter a valid email address, and then click Next. Select Auto-check for updates as needed, and then click OK to initialize the device. Step 4 If initialization failed, click to see more information. -
Page 11: Installation
Quick Start Guide 3 Installation 3.1 Packing List ● Tools required for the installation, such as electric drill, are not included in the package. ● The operation manual and information on the tools are on the disk or the QR code. Figure 3-1 Packing list 3.2 Dimensions Figure 3-2 Dimensions (Unit: mm [inch]) -
Page 12: Installing The Camera
Quick Start Guide 3.3 Installing the Camera 3.3.1 Installation Methods Figure 3-3 Installation methods 3.3.2 (Optional) Installing the SD Card ● SD card slot is available on select models. ● Disconnect the power before installing or removing the SD card. Press the reset button for 10 seconds to reset the device. -
Page 13: Optional) Installing Waterproof Connector
Quick Start Guide Figure 3-5 Attaching the Camera 3.3.4 (Optional) Installing Waterproof Connector This part is needed only when there is waterproof connector in the package and the device is used outdoors. -
Page 14: Adjusting The Lens Angle
Quick Start Guide Figure 3-6 Install waterproof connector 3.3.5 Adjusting the Lens Angle Figure 3-7 Adjust lens angle... - Page 15 Quick Start Guide...