R7M-DAC16D
WIRING INSTRUCTIONS
■ SCREW TERMINAL
Torque: 0.5 N·m
■ SOLDERLESS TERMINAL
Refer to the drawing below for recommended ring tongue
terminal size. Spade tongue type is also applicable.
Applicable wire size: 0.25 to 1.65 mm
(AWG 22 to 16)
2
Recommended manufacturer: Japan Solderless Terminal
MFG. Co., Ltd, Nichifu Co., Ltd
3.3 (.13) max
mm (inch)
EM-7803-AL Rev.4 P. 8 / 8
SEN TRONIC
056 222 38 18
mailbox@sentronic.com
www.sentronic.com
AG