M-system R7D-TS4/UL Instruction Manual page 3

PC CONFIGURATOR
The following parameter items can be set with using PC Configurator Software (model: R7CON).
Refer to the users manual for the R7CON for detailed operation of the software program.
■ INTERFACE SETTING
PARAMETER
Communication Timeout
Status Data
Serial ID
■ CHANNEL INDIVIDUAL SETTING
PARAMETER
TC Type
Temp Unit
Zero scale
Full scale
Bias
Gain
Zero temp
Full temp
■ EXTENSION MODULE SETTING
PARAMETER
Output Hold/Clear
SEN TRONIC
SETTING RANGE
0.0 – 3276.7 (sec.)
ON: Disable
OFF: Enable
English one-byte characters within 8 characters
SETTING RANGE
K (CA)
E (CRC)
J (IC)
T (CC)
B (RH)
R
S
C (WRe 5-26)
N
U
L
P (Platinel II)
(PR)
C, F, K
-32000 to +32000
-32000 to +32000
-320.00 to +320.00
-3.2000 to +3.2000
Depends on sensor type
Depends on sensor type
SETTING RANGE
Output Hold
Output Clear
056 222 38 18 mailbox@sentronic.com
AG
R7D-TS4
DEFAULT SETTING
1.0 (sec.)
OFF: Enable
DEFAULT SETTING
K (CA)
C
0
10000
0.00
1.0000
0.00 (degC)
0.00 (degC)
DEFAULT SETTING
Output Hold
EM-7802-B Rev.10 P. 3 / 10
www.sentronic.com