Updating The Firmware From The Uefi Embedded Shell - HP ProLiant ML30 Gen10 User Manual

Updating the firmware from the UEFI Embedded Shell

Updating the firmware from the UEFI Embedded Shell
Procedure Procedure
1. Access the System ROM Flash Binary component for your server from the Hewlett Packard Enterprise Support Center
(https://www.hpe.com/support/hpesc https://www.hpe.com/support/hpesc).
2. Copy the binary file to a USB media or iLO virtual media.
3. Attach the media to the server.
4. Boot to the UEFI Embedded Shell.
5. To obtain the assigned file system volume for the USB key, enter map –r .
6. Change to the file system that contains the System ROM Flash Binary component for your server. Enter one of the
systems available, such as fs0: or fs1: , and press Enter
7. Use the cd command to change from the current directory to the directory that contains the binary file.
8. Flash the system ROM by entering fwupdate –d BIOS -f filename .
9. Reboot the server. A reboot is required after the firmware update in order for the updates to take effect and for hardware stability
to be maintained.
Enter.
Updating the firmware from the UEFI Embedded Shell
fsx file
216