HP ProLiant ML310 G3 Installation Instructions

HP ProLiant
ML310 G3 Storage Server

installation instructions

© Copyright 2005 Hewlett-Packard Development Company, L.P.
Windows® is a U.S. registered trademark of Microsoft Corporation.
First edition December 2005
Product names mentioned herein may be trademarks of their respective
companies as reflected by an associated footnote.
The information in this document is subject to change without notice.
www.hp.com
Important Safety Information
Læs dokumentet Vigtige sikkerhedsoplysninger på dokumentations-cd'en, før produktet installeres.
Prima dell'installazione, leggere sul CD le Informazioni importanti sulla sicurezza.
Les "Viktig sikkerhetsinformasjon" på dokumentasjons-CDen før du installerer dette produktet.
Tärkeisiin turvatietoihin" Documentation CD -levyllä ennen tuotteen asentamista.
Läs dokumentet Viktig säkerhetsinformation på dokumentations-cd:n innan du installerar denna produkt.
*406540-001*

About this document

This document provides procedures for installing the HP ProLiant
ML310 G3 Storage Server. HP assumes that you are qualified in
servicing computer equipment, and trained in recognizing hazards in
products with hazardous energy levels.
Regulatory notice
The rating label on the device gives the class (A or B) of the
equipment. Class B devices have an FCC logo or ID on the label.
Class A devices do not have an FCC logo or ID on the label. After you
have determined the device class, see the HP ProLiant Storage Server
user guide for complete regulatory compliance notices. This guide is
printed, and also provided in the product kit as a file on the
documentation CD.

Kit contents

Included in your storage server kit are the following:
• HP ProLiant ML310 G3 Storage Server (with operating system
preloaded)
• Power cord
• Documentation CD—Contains administration guide, user guide,
and these installation instructions.
• Quick Restore DVD
• Service Release DVD
• Safety and Disposal Documentation CD
•
HP ProLiant Storage Server user guide
• ProLiant Essentials Integrated Lights-Out Advanced Pack
• End user license agreements
NOTE: A keyboard and mouse are not included with the storage
server.
Operating system
The HP ProLiant ML310 G3 Storage Server is preloaded with the
Windows® Storage Server 2003 operating system. Prior to power up,
deployment instructions found in the HP ProLiant Storage Server user
guide should be followed to enable the successful configuration of the
storage server.
Installing a storage server (tower)
Follow the steps in this section to set up a tower model server.
WARNING! To reduce the risk of electric shock, fire, or damage
to the equipment, do not plug telephone or telecommunications
connectors into RJ-45 connectors.
1. Connect network cable and any peripheral devices to the server.
2. Connect the power cord to the back of the server.
3. Connect the power cord to the AC power source.
4. See the storage server startup chapter in the HP ProLiant Storage
Server user guide.