HP ProLiant ML30 Gen10 User Manual page 126

If the server is in rack mode: Install the server on the tray .
18. Connect all peripheral cables to the server.
19. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
20. To configure drive arrays and logical drives, use UEFI System Utilities or HPE Smart Storage Administrator (HPE SSA).
For more information, see the HPE Smart Array SR Gen10 Configuration Guide on the Hewlett Packard Enterprise website
(https://www.hpe.com/info/smartstorage-docs https://www.hpe.com/info/smartstorage-docs).
The installation is complete.
Installing a Smart Array standup storage controller 126